Перейти к содержимому

Чтение отчётов мероприятия

See where your event page visitors came from

Every section of your event's Traffic screen: how many people opened your event page, where they arrived from, and how many reached the confirmation page at the end of checkout.

Для кого
Anyone deciding where to spend the next round of promotion
Займёт
7 минут

Ваш экран «Traffic»

Что нужно перед началом

  • You're an owner or an admin on this event, or you have a Stats or Limited Stats login for it. All four see every figure here. If Traffic isn't in your event menu, ask an owner or an admin to change your role.
  • Your event page has had at least one visit. Everything here counts visits to this event's own page, never to another event you linked to it.
  • Views

    Open your event and go to Traffic. The chart counts every opening of your event page, one bar a day. The table below splits the same days into Visits, Direct Visits, Referral Visits and Unique Visits.

    Referral Visits is arrivals on a buyer's referral link or a promoter's link, and Direct Visits is everything else, a tracking link included, because that one credits nobody. Unique Visits counts a visitor once in each hour they were on the page, so browsing across two hours counts twice. Hourly, Daily, Weekly and Monthly reshape the chart, and the date box narrows every figure on the tab.

    The Views section of the event Traffic screen, with direct, referral and unique visits above a chart of visits by day
    Traffic, Views.
  • Conversions

    Converted is the visitors who reached your order confirmation page, and Not Converted is the rest. The table gives the same two a day at a time, as Visitors and Conversions. Daily, Weekly and Monthly are the only widths offered here.

    This tab counts a conversion each time somebody reaches your order confirmation page, free registrations included, so a buyer who reloads that page counts twice. Read the two together as your event page's hit rate rather than as an exact order count.

    The Conversions section, with converted and not converted visitors above a chart of conversions by day
    Traffic, Conversions.
  • Languages

    The ring and the table under it count visitors by the language their phone or browser asked your event page for. Other is the visitors whose device did not say. The filter above the ring narrows the ring to the languages you pick, and leaves the table whole.

    This is the language somebody reads in, not the country they are in. A Spanish reading on a local show is worth a Spanish advert rather than a Spanish tour date. The ring counts a visitor once per browsing session, so somebody who comes back next week counts twice.

    The Languages section, with the ring of visitors by language and the table of counts beside it
    Traffic, Languages.
  • Devices

    Total Visitors and the five cards beside it name the most common browser, device type, platform, brand and model. Under them, five lists draw the full breakdown as tiles and a table: Browsers, Device Types, Platforms, Device Brands and Device Names.

    All five lists are the same visitors counted five ways, so each one adds up to Total Visitors. They leave out the visits we could not read a device from. If most of your visitors are on a phone, open your own event page on one before you buy more advertising.

    The Devices section, with the top browser, device type, platform, brand and model above the full browser breakdown
    Traffic, Devices.
  • Referrer URL

    One row per site that sent you visits, with how many each sent. N/A is visits that arrived with no site behind them, which is a typed address, an app, or a link inside a message.

    The list folds Facebook, Instagram, Google and Yahoo into one name each, and gives every other site a row of its own address. The date box on the other tabs does not reach this list, which always covers the whole run. Total by Day shows the same sites a day at a time.

    The Referrer URL section, one row per site that sent visits to the event page
    Traffic, Referrer URL.

Или поручите это помощнику

Fai, the assistant inside your dashboard, reads this screen too, and so does your own AI assistant through our MCP server. Ask for a date range and they apply it everywhere except the referrer list, which always covers the whole run.

В вашей панели, с Fai

where did the traffic for this event come from, and how many of those visitors actually bought a ticket?

Из вашего собственного ассистента, через MCP

Подключите ассистента к нашему серверу MCP и попросите его:

Для этого достаточно настройки только для чтения с той страницы. Здесь ничего не меняется, поэтому оставьте --read-only как есть.

Find my event by name, then pull its traffic and tell me which referring sites sent the most visits, and how many of the people who opened the event page went on to buy.

Из терминала

Установите CLI по ссылке нашей страницы CLI, войдите командой ticketfairy auth login и выберите бренд, с которым работаете, командой ticketfairy brand use <BRAND_ID>. ticketfairy brand list и ticketfairy event list выводят идентификаторы, которые нужны командам ниже.

You need an owner, admin, Stats or Limited Stats login. Two tabs have no command. Devices and Visitor Locations count page visitors, and the CLI metrics with those names count buyers, so read those two on the screen.

Visits, unique visits and conversions

ticketfairy event stats <EVENT_ID> --metric traffic

The sites that sent you visits, a day at a time

ticketfairy event stats <EVENT_ID> --metric referrer-by-day

Вопросы, которые могут возникнуть

What does the Visitor Locations tab show?
A map of the towns your visitors opened the page from, with the top cities, regions and countries beside it. The place comes from the visitor's internet connection, so it is where they were rather than where they live, and the map drops the visits we cannot place.
Why is every number on this screen zero?
Nothing has opened your event page yet, or the switch at the top right sits on Pre-Registration Traffic for an event that never took a pre-registration. That switch keeps its setting on every event you open next, so check it before anything else.
What is the difference between visits and unique visits?
Visits counts every opening of your event page, including the same person coming back. Unique Visits counts each visitor once in each hour they were on the page, so browsing across two hours counts twice.
Do these figures cover the other events I linked to this one?
No. Everything here counts visits to this event's own page and nothing else, which is why it can differ from your Influencers figures, where the screen counts linked events together.
Do my own team's visits count?
Yes. Visits counts every opening of your public event page, your own team's included, so a week of checking your page lifts the figure on a quiet event. Nothing on this screen takes them back out.
Which times are these figures in?
The chart groups and labels the days in your event's own timezone, so a bar reads where the event is rather than where you are. The date box is not converted the same way, so a range you pick can take in an hour or two either side of those days.
Why don't the tabs add up to the same total?
They count different things on purpose. Views counts every opening of the page, while Locations and Devices count only the visits we could place or read a device from. Languages and Conversions count each visitor once a session or once an hour.
What does the Pre-Registration Traffic switch do?
It swaps every figure on the screen to your event's pre-registration page instead of the event page. It stays where you leave it for every event you open next, so put it back to Overall Traffic when you are finished.
Can I get this out into a spreadsheet?
Copy table above each table puts it on your clipboard, ready to paste. The charts and the device tiles have no export of their own, so ask Fai for those figures.
Why does it say "We don't have enough data for your event"?
That message appears when this event has visits from before 22 April 2022, which is earlier than the point our traffic recording changed. The figures still load; read the conversion split on those early days as a guide rather than a count.
Why doesn't a day in Visitor Locations match the cities under it?
The day row and the lists beneath it count different things, so they do not add up to each other. Take your city, region and country figures from Total by Location, which counts each visitor once.
Why is a site I know sent people missing from Referrer URL?
Some apps and messaging clients pass visitors on with no site attached, so those land in N/A rather than under a name. Only a buyer's referral link or a promoter's link counts as a Referral Visit on Views; everything else, your own tracking links included, arrives as a direct visit.

Сделайте это на своём мероприятии

Создайте аккаунт, соберите мероприятие и повторите эти шаги в своей панели. Без предварительного звонка отдела продаж.

Заказать демо

Посмотрите, как Ticket Fairy ведёт билеты, старт продаж и вход. Выберите удобное время.

Видеозвонок на 45 минут
Выберите удобное время